Showing posts with label piano. Show all posts
Showing posts with label piano. Show all posts
Saturday, October 27, 2007
Further to yesterday's article on the piano-a-tron, tonight I was at butcher Boy's - more on that story later - and he and flatmate Rob (a fellow refugee from work) were busy installing the piano-a-tron PC and speaker connections as well as the power cables, on off switch and then rebuilding the piano around it. I am very pleased to say that it all works very well, and all the function buttons work. For your delectation, below is a photo of me flat on my back under the piano using cable clips to keep all the wires today so Rob can play (most of) the piano - there are a few broken hammers inside.
Friday, October 26, 2007
Resurrecting the piano-a-tron
You may remember the piano-a-tron that I helped Butcher Boy construct for his old flat. Well, following their flat move in early August, the Piano was a little ill. The electronics had been ripped out, and the piano itself needed some structural work to make it work again (there are still a few sticky keys, and the tuning is interesting - more honky tonk than perfect pitch).
Today I went round to Butcher Boy's flat to work on a replacement control mechanism for the piano-a-tron. We went for a solder-less alternative, since we had no drill to drill through the circuit board. Thus we ended up with a second rate solution of LX tape and bulldog clips. I am currently working on a hopefully better solution to be implemented soon.
Wednesday, August 8, 2007
What to do on a revision break?
Upon our return, the joyful noise of west end drinking could be heard for the pub just across butcher Boy's new backyard! So we started hacking away at the bolt. At this point, I noticed that the rubber ring kept getting in the way and cut it with a knife. after doing so, the bolt fell through the hole....no need for hacksaws after all.
We then set about fitting the new toilet seat, with much discussion as to whether it was square (ie equal support on either side of the bowl) and whether we had the angle correct such that the seat would stay up by itself - in a flat of 3 males this is an important consideration! Once that was sorted, we helped butcher Boy sort some books onto his shelves and drew a ground plan of the room suggesting where would be best to site the various items in relation to power points, radiators etc. Hopefully butcher boy was pleased.
Butcher boy was driving with the tattooed drinker and myself sat in armchairs holding onto furniture in the back. Upon arrival at the new flat, butcher boy instructed me to guide the van back to pack on the pavement as close to the close door as we could. This involved some weaving between bollards and bins, round small children and avoiding parking on top of a cellar light in the pavement.
This second journey completed we left butcher boy to get on with his unpacking!
Labels:
ASDA,
butcher boy,
IKEA,
Maccy D's,
piano,
The tattooed drinker
Thursday, March 22, 2007
The creative genius (butcher boy) called me to help him with a plan
The task
It sounded simple enough. Butcher boy from work said he wanted to turn an upright piano his flat had acquired (legally) into a device for controlling PC media plyaers, so b y pressing a Piano key, you could play/pause, stop, skip and shuffle the tracks on the playlist.
Background
They had a PC which was networked and could thus be controlled from elsewhere, and they had a piano.
The how, and why and when.
You need:-
- A Maplin's joypad for gaming
- A screwdriver to take the controller apart
- Soldering Iron
- Wires
- Sticky tape
- Blue tac
- 5p coin
- You use the blutac to attach one wire to a 5p and stick this to the underside of one of the keys ( following the dis-assembley of the piano).
- Another wire is connected to the tray in which the keys sit. The two are arranged such that when you press the key, the 5p comes into contact with the bare end of the wire in the tray, thus making the contact.
- The wires then connect to a controller which has had the buttons removed. Detailed study of the Printed Circuit Board (PCB) allow you to work which two points need to be connected in order to complete the circuit. You then solder the wires from the piano onto these points.
- This is repeated for 4 piano keys.
Then you go for pizza.
- Then you download a plugin for the media player of your choice (winamp) which allows control of the media player using a joypad.
- Assigning the piano key presses to a function took a little effort, involving checking the positioning of the two contacts such that they were not touching at rest, but did touch when the key was pressed.
- Finally you load some random tracks and assign the keys.
Middle C - Play
The next one to the right - Stop
The next one to the right - Skip forward
The next one to the right - Toggle shuffle on/off
- Then you check the display on the small 2 line LCD display
that Butcher boy and the Supermarket vetrans have got and lo when you press play it changes and from the speakers you hear Feeder. Stop, and skip also work..............
The final step is to move the power switch from the PC case and extend it so it it is under the Piano keyboard so you can turn the PC on/off when the piano is back to normal.
I do not accept responsibility if you too end up with burned fingers following this experiment.
However should you decide to copy the idea, then you must contact the patent office who have the details of the PC-JukeBox-Piano-atron.
Subscribe to:
Posts (Atom)